Namokar Enterprises

• Design Standard BS 7350.
• Precise double regulation.
• Tamper proof setting with a lock shield.
• PTFE sealing disc to ensure a proper shut off.
• Provided with Inlet / Outlet pressure test cocks.
• Facilitates system design, hence saves energy.
• Handwheel Operated.
• Easy to install and set.
• Accentuates systematic commissioning of the plant for an optimal operation.

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

*Valves with Neoprene / Viton / Silicon lining and CF8M (S.S 316) Disc can also be provided at nominal extra cost.

• Design Standard IS 14846 PN 1.6.
• Bolted Bonnet, Inside Screw, Non-Rising Stem.
• Rigid and Sturdy design.
• Handwheel Operated.
• Flange Ends as per IS 1538.

Test Pressure (Hydrostatic) :
Shell : 2.4 MPa
Seat : 1.6 MPa
Maximum Working Temperature : 45°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Full Bore, Two Piece Design.
• Quarter Turn, Lever Operated.
• Provided with Forged Brass Hard Chrome Plated Ball.
• Premium Quality PTFE Gland Packing and Seating.
• Chrome Finish.

• Design Standard IS 13095 / BS EN 593 (BS 5155). 
• Wafer Type. 
• Lever Operated. 
• S.G Iron construction. 
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems. 
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges. 
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes. 
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538. 

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Single Piece Design, Integral Seat.
• Meant for Vertical Lines Only.
• Permits flow in one direction and shuts automatically if the flow reverses.
• Spring Loaded and 'O' Ring Type.
• Also available with metal to metal seating.