Namokar Enterprises

Sant Brass Ball Valves are a popular choice for reliable and efficient fluid control in a wide range of applications. Known for their durability, performance, and cost-effectiveness, Sant valves offer an excellent solution for both domestic and industrial needs.

Sant Brass Ball Valves are quarter-turn valves that use a rotatable ball with a bore to control the flow of a liquid or gas. When the bore is in line with the flow, the valve is open; when it's pivoted 90 degrees by the handle, the valve is closed. Sant, a renowned manufacturer in the valve industry, produces these valves from high-quality forged brass, ensuring robust construction and long-lasting performance.

Sant Brass Ball Valves (often the FBV 2 model) typically boast the following features:

• Body Material: Forged Brass (often IS 6912 Gr. FLB), providing excellent strength and corrosion resistance.

• Design: Two-piece design, lever operated, allowing for easy installation and maintenance.

• Seat: Renewable PTFE (Polytetrafluoroethylene) seats, ensuring a tight seal and smooth operation over time.

• Ball: Brass (Nickel Plated), for enhanced durability and reduced friction.

• Stem: Machined Brass Nickel Plated.

• Port Opening: Full bore, minimizing pressure drop and maximizing flow capacity.

• End Details: Screwed female BSP Parallel Threads, for easy connection to pipelines.

• Pressure Rating: Typically PN-25, meaning they can handle a nominal pressure of 25 bar. They are tested to higher hydraulic pressures (e.g., 40kg/cm²g hydraulic body test pressure and 25kg/cm²g hydraulic seat test pressure).

• Sizes: Available in a wide range of sizes, from small (e.g., 1/4 inch, 8mm) to larger diameters (e.g., 4 inch, 100mm).

roducPt : Sant Forged Brass Ball Valve

Pressure Rating : PN-25
Body Material cum standard : Forged Brass
Product Description : Two piece design lever operated
Type of Seat : Renewable PTFE Seats
Type of Ball : Brass (Nickel Plated)
Stem: Machined Brass Nickel Plated
Packing : PTFE
Port Opening : Full Bore
End Details : Screwed female BSP Parallel Threads

• It is dismountable and its movement can be pulled out easily for repair and exchange without taking the meter from pipe. (The recorder can be replaced on condition that water is available)
• The recorder is sealed up so that readings are over clear.
• Measuring devices are general – purpose and can reduce alternate parts.
• Its parts are connected magnetically and work numbly and reliably because of slight obstruction.
• The pressure loss is small.
• It is durable.

Product : ‘SANT’ Cast Iron Globe Valve
Product Standard : BS:5152 / DIN 86251
Type of Pattern : Straight Pattern
Pressure / Class / Rating : PN 16
Body Material cum Standard : Cast Iron IBR 86 to 93 Gr.A
Description : Bolted Bonnet, Outside Screw & Yoke Type Rising Stem
Type of Seat : Renewable seat
Type of Disc : Renewable disc
Trim : SS AISI-410
Gland Packing : Expanded Pure Flexible Graphite
End Details : Flanges as per DIN 2533 RF (PN 16) Undrilled

Rating : PN 16
Body Test Pressure : 26Kg/cm²g (Hyd.)
Seat Test Pressure : 16Kg/cm²g (Hyd.)
Backseat Pressure : 16Kg/cm²g (Hyd.)
Working Pressure : Max BOP 13Kg/cm²g at 220°C Steam

Test Certificate in Form lll-C as per IBR is furnished with every supply.

• Product Standard: IS:14846
• Pressure / Class / Rating: PN 1.0 PD Type
• Body Material cum Standard: Cast Iron IS:210 Gr.FG200
• Description: Bolted Bonnet, Inside Screw & Non-Rising Stem
• Type of Seat: Renewable seat
• Type of Disc: Solid wedge
• Trim: Cu-Alloy Rings, stem SS (12 Cr.12)
• Gland Packing: Jute & Hemp / Rubber
• End Details: Flanges as per IS:1538 FF drilled

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

As per IS:1239 (PART2): 1992 Screwed BSP Ends.
The carbon steel used in drop forged steel pipe fittings contains sulphur and phosphorus not exceeding 0.06% each.

End Connections
Screwed Female Ends conform to BSP as per BS21 / IS:554.
Other types of threads i.e. NPT can be given on request.

Test Pressure
IS:1239 (PART2) 1992-Pipe Fittings are tested to 1000 psig. (Hyd.)